Choose category of interest (at left).

Taylor Technologies' product demos use a high-quality video format. They are best viewed on a computer with a processor that is at least 1.6 GHz and has at least 1 GB RAM. To prevent "stuttering," it may be helpful to pause the video for about 20 seconds immediately after starting it to allow it to buffer completely.

Click to view the product demonstration:

Develop a Good Testing Technique  [updated 3/12/10]   Residential Series™ Kits for Homeowners: How to Choose the Taylor Kit That’s Right for You  [updated 11/14/11] OT vs. DPD:  What’s the Difference?  [updated 11/14/11] Demos of All Available Tests  [updated 6/21/12] Should I Consult an Expert?  [updated 11/14/11] When to Replace Reagents  [updated 11/14/11]   K-2005 Complete™ Kit with Liquid DPD: Who Should Use This Kit?  [updated 3/5/10] How to Take a Sample  [updated 3/12/10] To Test Chlorine with Liquid DPD  [updated 3/5/10] To Test Total Bromine with Liquid DPD  [updated 3/5/10] To Test pH  [updated 3/5/10] To Perform an Acid Demand Test  [updated 3/5/10] To Perform a Base Demand Test  [updated 3/5/10] To Test Total Alkalinity  [updated 3/5/10] To Test Calcium Hardness  [updated 3/5/10] To Test Cyanuric Acid  [updated 3/5/10] The Watergram®  [updated 7/19/11] The Pool & Spa Water Chemistry Guide  [updated 3/5/10] Upgrade Your Kit  [updated 3/5/10]   K-2006 Complete™ Kit with FAS-DPD: Who Should Use This Kit?  [updated 3/5/10] How to Take a Sample  [updated 3/12/10] To Test (Free and Combined) Chlorine using FAS-DPD  [updated 3/5/10] To Test pH  [updated 3/5/10] To Perform an Acid Demand Test  [updated 3/5/10] To Perform a Base Demand Test  [updated 3/5/10] To Test Total Alkalinity  [updated 3/5/10] To Test Calcium Hardness  [updated 3/5/10] To Test Cyanuric Acid  [updated 3/5/10] The Watergram®  [updated 7/19/11] The Pool & Spa Water Chemistry Guide  [updated 3/5/10] Upgrade Your Kit  [updated 3/5/10]   Countertop Laboratories for Retailers: WiseLAB® Choices  [updated 6/21/12]   Watergrams: Watergram® Water Balance Calculator (Wheel)  [updated 8/9/11] Electronic Watergram® Water Balance Calculator  [updated 8/9/11]   General Test Interferences: Calcium Hardness Test  [updated 3/10/10] Chlorine Test  [updated 3/22/10] pH Test  [updated 3/5/10] Total Alkalinity Test  [updated 3/5/10]   When to Replace Reagents  [updated 11/14/11] "Test Your Test Kit" with Standard Solutions (K-7066-E)  [updated 4/10/08] FAS-DPD Titration Test for Chlorine 0.2-20 ppm  [updated 8/30/05] Testing Sodium Chloride (Salt) with an Electrolytic Chlorine Generator System  [updated 8/28/12] Testing for Hydroxyl Alkalinity (K-1537)  [updated 10/7/10] Testing P/M & P/T Alkalinity in Industrial Waters (K-1533PM & K-1533PT)  [updated 8/25/05] Testing for Chlorine as Liquid Bleach (K-1579)  [updated 8/18/11] Performing a Buret Titration (K-0401)  [updated 1/5/11] Testing for Chloride Using the Argentometric Method (K-1549)  [updated 10/7/10] Testing for Chloride Using the Mercuric Nitrate Method (K-1598)  [updated 11/15/10] Testing for Free & Combined Chlorine (or Total Bromine) with FAS-DPD (K-1515 or K-1517)  [updated 10/7/10] Testing for Chlorine Dioxide (K-1502)  [updated 10/7/10] Conductivity Neutralizing Solution (R-7022)  [updated 8/30/05] Testing for Glutaraldehyde (K-1186)  [updated 10/8/10] Testing for Calcium and Total Hardness (K-1514)  [updated 12/14/11] Testing for Trace Total-Hardness (K-1504)  [updated 8/30/05] Testing for Hydrogen Peroxide (K-1825)  [updated 11/15/10] Testing for Molybdate Using Powdered Indicator (K-1805P)  [updated 4/20/11] Testing for Nitrite in the Presence of Glycol (K-1510)  [updated 10/7/10] Testing for Nitrite without Glycol Interference (K-1565)  [updated 1/21/11] Testing for Peracetic Acid (K-1546)  [updated 10/13/10] Testing for Phosphonate in Non-Fluoridated Water (K-1584)  [updated 5/25/11] Testing for Phosphonate Using pH Paper and Fluoride Masking Agent (K-1583)  [updated 10/7/10] Testing for Total Free Polymer (K-1190)  [updated 10/5/10] Testing for Quaternary Ammonium Compounds (K-1582)  [updated 10/13/10] Testing for Sulfite  [updated 12/12/05] Syringe Filtration System (9803)  [updated 8/14/07]   Click to view the webinar: Stop Sabotaging Your Test Results (by Chris Golden, CWT, for Association of Water Technologies)  [12/16/10] Using the SampleSizer® (6190)  [updated 5/18/10] Using the SpeedStir® (9265)  [updated 8/9/11] Using the Unit Dose Dispenser™ with FAS-DPD Powder (9250)  [updated 5/11/10] Colorimeter Promo  [updated 10/31/12] Testing for Calcium Hardness 4 (K-8026 for M-3000)  [updated 4/30/13] Testing for Cyanuric Acid 120 (K-8032)  [updated 4/30/13] Testing for Ferrous Iron 3 (K-8010 for M-3000)  [updated 4/30/13] Testing for Free & Total Chlorine 4 (K-8001)  [updated 4/30/13] Testing for pH 6.5-8.5 (K-8027)  [updated 4/30/13] Testing for Phosphate 3 (K-8005)  [updated 5/9/13] Testing for Silica 4 (K-8008 for M-3000)  [updated 4/30/13] Testing for Total Bromine 10 (K-8002)  [updated 4/30/13] Testing for Total Iron 4 (K-8009)  [updated 4/30/13] Testing for Total Copper 3 (K-8012)  [updated 4/30/13]