STRIKE FIRST AGAINST ALGAE

 

High temperatures, a sunny day, and plenty of company—factors that make for a great pool party—also can energize a group of nasty intruders:  algae.

 

Without any apparent warning, algae spores can turn sparkling pool water into a green murky mess. Pool surfaces can develop a slippery coating, potentially dangerous as well as unsightly. Powdery yellow-brown deposits of mustard algae may appear on the walls or bottom of the vessel. Or, tar-like patches of black algae may appear on stairs, in corners, or in other nooks where water circulation is problematic.

 

Why? Could have been the wind and rain from the night before that dumped these opportunistic invaders into the pool, or a pressure wash of the deck. Days of hot sun and a heavy bather load might have warmed the water and depleted the sanitizer, making conditions right for an algae bloom. Phosphates in the run-off from nearby landscaping may have fueled their growth.

 

Whatever the reason, action is needed. The plan of attack often involves the same chemicals that can prevent visible signs of algae. Used proactively, those chemicals are termed algaestats. The difference between an algaestat and an algaecide can be as simple as the strength of the treatment chemical.

 

It’s much easier to be proactive against algae, compared to fighting an outbreak. Keeping a sufficiently high level of sanitizer like chlorine is one way to take preventive action. However, should the chlorine level drop because a heavy bather load creates a competing demand for disinfectant, bacteria can develop. They will also compete for available sanitizer, allowing algae to gain the advantage.

 

Optimal levels of pH, total alkalinity, and calcium hardness (the essentials of balanced water) help prevent algae, too. Scale or corrosion, signs of water that’s not balanced, creates rough surfaces that are conducive for algae attachment.

 

Taylor offers an array of test kits for checking these water-quality parameters, plus the treatment chemicals associated with a well-maintained pool or spa, such as chlorine, cyanuric acid (chlorine stabilizer), bromine, biguanide, salt, and monopersulfate shock.

 

Additionally, Taylor makes kits for testing quat and polyquat algaecides; orthophosphate; and low-level copper—your “algae arsenal.”

 

Quaternary ammonium compounds, or “quats,” destroy algae by disrupting their cellular membranes. Quats work particularly well against green algae. They are the least expensive, best-selling pool product. Because quats tend to foam, they’re unsuitable for spas.

http://www.taylortechnologies.com/managed_content_50_files/image001.jpg

K-1582 tests for higher levels of quats and polyquats.

 

Polyquats, which have a much longer molecular structure than quats, can affect all algae types and are nonfoaming. They suffocate algae by adhering electrostatically to their outer membrane, just as metal filings cling to a magnet.

 

Check quat and polyquat levels with K-1582 when higher algaecide concentrations are used, K‑9065 for lower.

 

Copper-based products also disrupt algae cell metabolism, making them an effective algaecide. Chelated copper solutions prevent the copper from staining surfaces, which can happen with copper salts. Use K‑1738 to help maintain the appropriate copper concentration.

 

Copper/silver ionization systems produce trace levels of the two metals to kill algae. Reportedly, copper works well against mustard algae and silver is potent against black algae. Only the copper ion needs monitoring; when copper readings are good, the silver level will be fine, too. Use K-1730.

© 2014 Taylor Technologies, Inc. • All Rights Reserved • View Privacy Policy